Abortion is Unethical Essay -- The Right to Life, Pro-Life Essays

Fetus removal is Unethical The Center for Bioethical Reform expresses that on lifetime normal there will be one fetus removal for every lady on the planet. This makes premature birth a general purpose of moral conversation. As per the World Resources Institute there are around 3,155,945 females around the world, and in the event that you utilized unrefined arithmetic to make a harsh gauge you would have conceivably 3,155,945 lost lives. We can no longer disregard an issue with such effect. I accept that fetus removal is an untrustworthy demonstration and ought not be an alternative to anybody.  One could state that a premature birth ought to be legitimate on the grounds that the creating baby is a piece of the female and she ought to have the option to do with her body what she loves, however this isn't so. The baby isn't a piece of her body, it is inside her body. Since the baby is produced using a blend of the male’s and the female’s DNA it has a totally unique synthetic make up than that of the female wherein it abides. The human creating inside the female was produced using a chromosome of both the male and the female creation it not so much the female and not so much the male. Likewise because of chromosomal changes the DNA could differ much more. In this way, a totally unique synthetic make up is being created inside the female and we currently have one life form within another. In this way making the contention quiet, the embryo has an alternate make-up of DNA and is hence an alternate life form.  Another misrepresentation of premature birth is that occasionally it tends to be utilized to spare the life of the mother. This circumstance simply doesn't occur. Dr. C. Everett Koop, previous Surgeon General expressed that he was never mindful or a solitary circumstance in which a pre-conceived child’s life must be taken so as to spare the life of the mother. Under 3% of ladies, ... ...They as indicated by this contention are not alive. Numerous different contentions depend on bogus circumstances and frequently don't think their morals however. It is my expectation that individuals would think about their morals before performing such a demonstration or in any event, something that would pave the way to it. I trust that individuals would search out data and information on something with such incredible repercussions.  Taking everything into account, the explanations behind premature birth are regularly unscrupulous, the consequence of misinterpretations about hereditary make-up, theoretical circumstances, not being prepared to cultivate a kid yet prepared to make one, and a deceptive choice to pick. Much the same as numerous different laws are set up to ensure others so other fetus removal laws ought to be set up. Premature birth ought not be lawful similarly as assault and burglary ought not be legitimate. Regardless of whether a law isn't passed to stop fetus removal individuals should turn out to be progressively instructed regarding the matter. Â

Wall Street Journal Executive Summary Essay Example | Topics and Well Written Essays - 750 words - 2

Money Street Journal Executive Summary - Essay Example The European Central bank chose to charge the business banks to profit cash on stores. To palliate superfluously immense measures of capital into the country, the Central Bank of Denmark fiercely chose to print kroner. Nations that were in milestone of breakdown, for example, Spain, can recoup their expectation by undercutting treasury charges that are term. These treasury charges offer back to speculators in the nation less principals than they started with. Various European nations, inside and out of the Eurozone, sold away considerate liabilities with developments of not over five years at a negative yield. This considered speculators answerable for the installment of benefits in holding it. In the event that solitary they would sell the bonds at much more significant expenses, they would appreciate benefits. Switzerland was not deserted either, as it sold out a total of bonds developing in 2025 and 2049. Ten years down the line, the yield was at a negative level when contrasted with the most current comparative security around two months back. Costs of Swiss securities which were developing as long as eleven years in the days to come have climbed in the optional market, so that their yields have drafted into the negatives. Switzerland later got upset about the outcomes that would follow the acquisition of a lot of euros to keep up the concealment of franc thus it chipped its maximum breaking point on the franc and diminished the store rates by 0.75%. The remote market in this manner, was exposed to unsettling. The way that it accepting cash to include money as store renders the unobtrusive in pessimism yield of the present multi year security as engaging. An indistinguishable circumstance happens to be knowledgeable about the Eurozone, as the Europe Central Bank has balanced its store rates and decreased them by 0.2% at that point pugnaciously bought securities. This occurred in January. Financial specialists were frightened off by the way that flattening would conceivably happen in the country. They were likewise disheartened incidentally

CPW Festival

CPW Festival Last night was the CPW Festival, an evening event with different MIT student groups doing fun activities. 58% of the admitted Class of 2009 are currently at MIT for Campus Preview Weekend (this post is dedicated to the other 42%!). This is the before picture, T-minus 2 hours until the event And this is the after picture, a half hour into the event! The Lab for Chocolate Science did chocolate truffle making! Obviously, Kelly, Jenna and Lulu loved it. One of the highlights of the Festival is the liquid nitrogen ice cream, provided by the nice folks from Putz. Another nice shot of the liquid nitrogen ice cream (aka CryoFAC). CryoFAC also did some ice carving, and provided lots of fun ice carving tools The guys from Tep had an awesome pickle frier which counted to 255 in binary. More craziness from the Tep guys exploding soda cans. The Random Hall dormitory had an area for boffing (mock combat; thats Camden in the white shirt) as well as 24 Jenga The Panhellenic Association sponsored some mini-golf, with prizes for a whole in one. Sadly, Veena missed her putt The Student Art Association helped students silkscreen their own tee shirts. OrigaMIT had a table and instructions for paper folding. Thats THE Andrea Hawksley in the black tee shirt. Undergraduate Association President Harel Williams deals the cards for a fierce game of poker. The evening featured many performances and demostrations, including the Student Juggling Club, the MIT Lion Dance Club, and the Sport Taekwondo Club (pictured above). The MIT Bhangra Club (energetic South Asian folk dance) also performed, much to the delight of Pooja, Veena, and dozens of other spectators. Some a capella groups, including the Muses and the Toons. Above, Resonance performs, with Solomon belting out this solo.

Truth vs. Fiction in Narrative of the Life of Frederick...

Truth vs. Fiction in Narrative of the Life of Frederick Douglass and Uncle Toms Cabin It is often said that truth is stranger than fiction. Perhaps, this is so, as truth wears no veil; it is stark reality. There are no soft edges in truth. Only the most zealous hunters, those willing to meet the sword, actively seek it. The majority, while considering ourselves open to the truth, may only realize it when it comes disguised as something else. In short, it seems that we need to see it as not threatening, but molded and plied into something we can digest. Narrative of the Life of Frederick Douglass, An American Slave is a brilliant and powerful piece which details one of the worst times in American History. After reading†¦show more content†¦The very fact that Douglass was essentially self-taught, and penned such a powerful piece belied the preferred opinion that blacks were inferior, thus suited for slavery. In addition, throughout the narrative, he expressed emotions and sentiments common to persons of all races. He says of his lack of knowledge of his birthday, A want of information concerning my own was a source of unhappiness to me, even during childhood (1824). By mentioning this, he calls attention to the fact that the slaves had the same desires as the dominant culture. While employed at the shipyard in Baltimore, he learned a trade and was able to earn money. He was able to command the highest wages given to the most experienced caulkers (1867). Yet, his master took his wages from him. As he says I contracted for it; I earned it; it was paid to me; it was rightfully my own (1868), yet he had to give it to his master solely because he had the power to compel me to give it to him (1868). Here, Douglass illustrates the desire of every man to be able to learn a trade, and earn honest wages. No man would want to be deprived of that freedom, yet Douglass was, because of slavery. As Meider writes in the Journal of American Folklore,

Should Minimum Wage Be Raised - 1863 Words

â€Å"When we talk about the kind of folks whose lives will be made better by raising the minimum wage, we re not talking about a couple teenagers earning extra spending money to supplement their allowance. We re talking about providers and breadwinners. Working Americans with bills to pay and mouths to feed† (Perez 2015). Minimum wage is a problem to America because some people cannot live off it and some people say businesses should not pay extra. Should the minimum wage be raised ? â€Å"A native of Detroit, Cecil Euseary, 52, moved to Holland, Michigan in 2007, after his mother died — he had to get out of town. He moved back to Detroit in 2014.He works at Burger King working minimum wage there. He can only get about 25 hours of work per week at Burger King. Cecil has been active in the D15 campaign to increase the minimum wage in Detroit to $15 per hour. He once met with U.S. Secretary of Labor Thomas Perez, when he was visiting Detroit. It s hard. If it weren t fo r my god mom — this is her house; I get a room upstairs — if it weren t for her, I don t know what, Cecil says. I d probably be out on the street, in a shelter. (Euseary 2014). The minimum wage should be raised from $7.25 to $10.10 an hour because if you raise the minimum wage to $10.10 an hour it would lift people out of poverty, it would increase the federal purchasing power and not as many families struggling to make ends meet. Here’s another story, Enriqueta works as a housekeeper for minimum wage in theShow MoreRelatedMinimum Wage Should Be Raised?958 Words   |  4 PagesMinimum Wage Louis Montgomery III English Composition 101 Mrs. Blackwell April 23, 2015 Minimum Wage Do minimum wage jobs help pay the bills? Do minimum wage jobs support the family? Should minimum wage be raised? Will raising the minimum wage reduce poverty? The idea of minimum wage jobs is to help people get work experience without having any skills. Most minimum wage jobs include fast food restaurants and grocery stores. Minimum wageRead MoreShould Minimum Wage Be Raised?1062 Words   |  5 Pagesever pressing question regarding Minimum wage. Not many subjects can ignite a controversy as quickly as that of whether or not minimum wage should be raised, or by how much should it be raised or if it should remain the same. What is minimum wage? By definition, minimum wage is the minimum hourly wage an employer can pay an employee for work. (â€Å"MinimumWage.com†) America’s minimum wage was first introduced by President Franklin D. Roosevelt in 1938. That minimum wage was introduced as part of the FairRead MoreShould Minimum Wage Be Raised? Essay1596 Words   |  7 Pagesgovernment has so generously termed the â€Å"minimum wage†. In Missouri, the minimum wage has been set at a rather appalling $7.65 per hour while in other states there are wages starting as high as $10. Though arguably the economy is not as sluggish and terrible as it once was, $7.65 per hour will not help those who have children, no college degree and debts to pay. It is not only Missouri that has minimum wage laws, but every other state in America has minimum wage laws in place. Both California and SeattleRead MoreMinimum Wage Should Be Raised1145 Words   |  5 PagesThe current minimum wage is $7.25, which equals two gallons of milk, one fast food meal or two gallons of gas. Can you imagine yourself working 12-hours a day and only having enough money to p ay for rent and put food on the table for your family? With working all those long hours, you can barely afford to pay your utility bills and after that you don’t have enough money or time for luxuries like clothing or vacation. You have no savings as matter of fact, you are in a huge debt and you are livingRead MoreShould Minimum Wage Be Raised?870 Words   |  4 PagesShould Minimum Wage Be Raised? Minimum wage has always been a controversial issue. Many politicians use the argument of minimum wage for their own political propaganda. Some may argue minimum wage should be raised, while others believe it will have detrimental effects on our economy if it is raised. Surprising to most people, minimum wage earners make up only a small percent of American workers. According to the Bureau of Labor Statistics, minimum wage workers make up about 2.8% of all workersRead MoreMinimum Wage Should Be Raised935 Words   |  4 PagesMinimum wage is an ongoing debate in the United States. There are some people who think that it should be raised to a higher rate and others who think that it should not. There are many different pros and cons with raising minimum wage. Minimum wage is at a balanced rate that should not be raised due to lack of skill, low education, and economic problems. Jobs that require minimum wage are created for young adults who are in college or high school. They are to help one get one on their feet so thatRead MoreMinimum Wage Should Be Raised910 Words   |  4 Pagesmaximize the American Dream on the minimum wage† (Benjamin Todd Jealous). In 1938, minimum wage was created by the federal government in order to protect workers by ensuring a minimum of twenty-five cents per hour worked. Though President Roosevelt had the right idea in protecting the workforce, something needs to be done to ensure that Americans are getting a reasonable amount of money for the amount of hours they have worked. As Benjamin Todd Jealous stated, minimum wage is not enough for the averageRead MoreThe Minimum Wage Should Be Raised998 Words   |  4 Pagesprestigious job at such a young age. However that is not the case, if the minimum wage is raised to $15 an hour, a 16 year old could make $18,000 yearly working only 25 hours a week at McDonalds. Now for tee nagers that have goals for college or a car, that would money to set aside for the future, however most 16 year olds do not have those goals in mind yet, so that extra money turns into wasted money. As of February 2016 the minimum wage ranges anywhere from $7.25-$10 across the United States. Florida’sRead MoreMinimum Wage Should Not Be Raised863 Words   |  4 Pagesthan triple the minimum wage. If the minimum wage is increased, it would eliminate people’s incentives to improve. On top of that, inflation would occur, and poverty would virtually stay the same. In addition, raising the minimum wage would bring on hardship for small businesses. Of course, one may argue that the minimum should cover the cost of living, but people should have to work for their money. The minimum wage should not be raised in the United States. If the minimum wage were to go up, peopleRead MoreThe Minimum Wage Should Not Be Raised858 Words   |  4 PagesRepublican presidential candidate, Ted Cruz, is of the opinion that the Minimum wage should not be raised. This is a large issue as the current federal minimum wage of $7.25 is not enough to support basic living costs in a fair number of states. Ted Cruz highlights the consequences of raising the minimum wage yet ignores the cons of it remaining static (Ted Cruz on the Minimum Wage). In an article in The Atlantic, the discussion of the cost of living is brought up. The article talks about how the

CSS Lean Operations Report Free Essays

string(79) " establishment of long term relationships with suppliers \(Montgomery, 2012\)\." 1. Executive Summary This report has been designed to help Crockwood Seat Suppliers (CSS), a manufacturing company based in the Midlands, to achieve its goal of eliminating waste in its production operations through leaning. The company which produces low volume seats using its current manufacturing processes which include pressing, forming, welding, sewing and assembly has been going through a difficult period. We will write a custom essay sample on CSS Lean Operations Report or any similar topic only for you Order Now CSS has lost some of its contracts to overseas competitors and as such has laid off many employees. In order for the company to improve its operations by eliminating waste of resources in its operational strategy, it is important for management to consider some of the points raised in this report. Management has to eliminate non value adding processes so as to make the firm’s operations tight and leaner (Liker, 2008). In order to achieve this, it is important for CSS to adopt operations methods that will promote a smooth flow of the manufacturing processes and prevent unnecessary loss of time and resources. Through lean operations, CSS can identify those areas where it has been wasting its resources. Besides, it will also be able to simplify the production processes and adjust its layout in a way that allows work to flow without interruptions (Balle, M. Balle, 2009). If it reduces wastes, the company will successfully reduce its cost of production which will help to improve its productivity. The goal of this report is to provide recommendations that will enable CSS to lean its operations by being on the alert for factors that can lead to waste such as waiting, flow, over production, inventory management and transportation. This report will identify the various ways through which these factors are affecting the operational efficiency at CSS and the various ways through which it can impact the company’s productivity and profits. However, before proceeding to carry out this evaluation, it is important to understand what leaning is all about and how CSS can take advantage of this operational strategy to improve its operational processes. 2. Introduction and Literature Review Lean principles were first adopted by the Japanese auto industry. The term lean operation was first used by John Krafcik in one of the pioneer studies that sort to know more about the concept (Radnor Bucci, 2010).In 1988 Krafcik studied how firms could make their operations more effective in an attempt to minimise waste of resources.The study found that the industry’s operational strategy had an impact on profitability given that effective operational processes appeared to help cut down production costs and enable the industry to meet production lead times better than other car manufacturing companies around the world (Radnor Bucci, 2010). The study found that Japanese car makers employed individuals whose only responsibility at the time was to identify areas that contributed to operational wastes and other non value adding operations. These employees helped the industry to reduce waste of resources, save millions of dollars and operate more efficiently. Lean is commonly considered as the set of tool that help in the identification and elimination of waste within in systematic operations (Liker, 2008). The elimination of waste leads to improvement in the quality of operations. This improvement includes a reduction of production lead times and costs without compromising quality. Lean tools involve Value Stream Mapping, Poka-yoke (error-proofing), elimination of time batching, Total Productive Maintenance, Rank Order Clustering, mixed model processing, single point scheduling and multi-process handling to name just these few(Balle, M. Balle, 2009). The underlying principle behind all these strategies is to improve the efficiency at every stage of the production operations. This principle is not true all the times, given that some operations contributions to the effective operation of a firm cannot be measured empirically. For instance, it is difficult to tell whether offering employees a coffee break actually affects their output. Another approach to Lean Manufacturing that is used by Toyota Motor Corp is designed to improve the flow or smoothness of the production process (Radnor Bucci, 2010). This helps to eliminate or minimise unevenness throughout the system. These include techniquesthat ensure that that the operations process is not stalled from time to time as it will reduce productivity (Pettersen, 2009). This is quite different approach which has been criticized by many operations professional for its inability to improved operations.Many factors contribute to the smooth flow of production processes within any factory. Some of these factors are visible and can be addressed by management. Employees’ personal state of mind can determine how smoothly operations will flow on a particular shift. This is something that is difficult for employers to address. For instance, the productivity of an employee who just picked a fight with his or her partner at home will likely be different from that of anoth er employee just returning from a honey moon. As such, Toyota’s lean operations strategy cannot guarantee the smooth flow of operational processes. The two approaches have a similar goal although they use different means to achieve these goals. The implementation of an uninterrupted flow makes it relatively easier to identify quality problems that can remain hidden in the system (Bicheno Holweg, 2009). When this happenedit leads to waste reduction making it a worthwhile strategy to consider. One of the strengths associated with this approach is that it provides a general system-wide perspective and has the ability to resolve even unidentified issues within an operations system. However, it is good to make use of the proactive approach that identifies areas that can lead to potential waste of resources. This approach makes it possible to look ahead and make necessary changes before waste of resources begins. This is better than waiting until the company has begun losing valuable resources before making the necessary changes.Lean and TPS are a loosely linked set of competing principles that share a common goal of cost reduction t hrough elimination or minimization of waste of resources (Chase, 2008). These include Waste minimisation, Perfect first-time quality, Pull processing, Continuous improvement, Flexibility and the establishment of long term relationships with suppliers (Montgomery, 2012). You read "CSS Lean Operations Report" in category "Essay examples" When all these techniques are used, they help to keep operations chains flowing without unnecessary interruptions and of course this helps businesses to meet the demands of their clients. The unrelated nature of some of these techniques can be explained by the fact that the TPS continued to improve since 1948 (Chase et al, 2007). This happened because it responded to the problems it set out to resolve within its own production facilities. This pragmatic nature of the TPS has made it possible for operations strategies to continue to improve dramatically because they are built on first hand experiences and not theoretical models that are sometimes diffi cult to see in real life situations (Bicheno Holweg, 2009). Toyota believes that the main technique used to achieve leaning lies in the reduction of three types of wastes common in many operations systems (Pettersen, 2009). These include the muda (â€Å"non-value-adding work†), muri (â€Å"overburden†) and mura (â€Å"unevenness†) (Pettersen, 2009). When these methods are used, they help to expose systematic problems. In this respect, the tools are flexible and can be adapted to different situations. One of the objectives of lean is to get the right things to the right place on time and in the right quantity. When this is done, it helps to achieve perfect work flow which is necessary for optimum productivity. Although much of the literature analysed above suggests that 3. Operational Evaluation of CSS The design of the facility is not ideal to promote work flow. In the literature review above, the importance of work flow to the achievement of tasks has been clearly outlined. Work has to flow smoothly in order to identify mistakes and weaknesses in the system. The factory layout has to be designed in a way that one operation leads to the next one (Liker, 2008). When work is done in this manner, it makes it easier to notice mistakes and easily correct them on time. This is because when a mistake occurs, the item can be moved back to the previous stage where it can be easily sorted out without having to move from one end of the factory to the other. When workers have to move from one end of the factory to another, it creates loops in the flow of work and they end up spending some of their time wondering about in the factory giving room for items to start piling at their posts (Balle, M. Balle, 2009). In an ideal design, raw materials should get into the factory from one side meanwhi le the finished goods are moved out of the factory from a different exit point designed purposefully for the exit (Radnor Bucci, 2010). However, CSS factory lay out is not designed in line with the flow of the manufacturing processes. This can be costly for the company in terms of time and even financial costs. Based on the above information and a review of the CSS’s current information, a number of weaknesses have been identified that need to be addressed. 3.1 Transportation There are some inefficiencies in the current transportation system which leads to waste in time and money which. After weld and manual assembly is complete, the frames are sent to goods outwards, where they are loaded to special jigs ( 15 per jig) to be sent to a plating sub-contractor. The normal quantity despatched is 600 (parts are not required to be common) and the despatch timing is sporadic, depending on when the stock is available to go out. The turnaround time is quoted as 2 days however, the process time is 30 minutes per batch. In this scenario, it better to deliver the frames in good quantity in order to cut down transportation costs. Considering that CSS has 20 working days in a month and the client only wants one shipment per day by lorry. At this rate, CSS needs to find a double carrier in order to be able to transport enough seats in one lorry shipment. It is ideal to deliver the shipments at night since the customer’s premises also operate night shifts. 3.2 Overproduction Again, given that 2520 seats are ordered monthly and a carrier can move 65 seats at a time, CSS has to put in place a strategy that will ensure that these chairs are delivered on time. CSS’s manufacturing facility is currently producing to mass production principles. The machines have a functional layout and produce components in large batches. The company needs to suit its production to meet the demands. For instance, given that demand has dropped there is no need operating at full capacity. This results in waste of energy and keeps machines working to meet a small order given that the company has lost some of its businesses to overseas competitors. Now, it is important for the company to cut back on costs and even consider hiring part time labour that is required to meet the demands of its existing customers (Montgomery, 2012). The company has to adapt its machines to meet its current market situation. For instance, instead of operating its machines at full capacity, CSS ha s to consider adapting its machines to meet current market demand. The pressing machine can be used at full capacity to produce forming in order to have material that it will use for a reasonable period of time. In that case, employees at the forming operation have to be mainly part timers with just a few full time employees. This is because once they do forming and pressing of material that can be used for a considerable time, they can go on to their second jobs and only come back when there is need for forming and pressing. 3.3 Waiting CSS’s manufacturing process for the frame assemblies starts with pressing and forming. Because of the short cycle time and high set up times the batch size is high, 5000. The product is placed in stillages and transferred in a batch size of 1000. The output from the press shop should be of equal proportions of all products. However, currently this is not achieved as the output ratio depends on the set up of the presses. The press is a shared resource. Given that the press is a shared resource, it could lead to waiting that will stall the smooth movement of the operations. It is ideal to allocate different times for different. This is because shared resources help to cut costs and as such, it is important to allocate different times for employees to use shared resources in an effort to minimize instances when waiting has to occur. Waiting can have serious effects on the flow of operations and productivity. Lanchester Steels Ltd supplies sheet metal stock to CSS on Mondays. Meanwhile Coventry Covers supply rolls of cover on Wednesdays. This can affect the pace of work in the case where they fail to deliver their suppliers. CSS needs to review its supply arrangement with its suppliers. It will be ideal if its suppliers deliver these materials on Saturdays, so that even if there is some delay of any sort, it will not alter the flow of work and the company will still be able to deliver seats to its clients on time. Failure to supply on time can lead to a termination of contract if it is recurrent in the industry. This is because these seats are needed at the car assembly line and if they do not show up, the assembly line could stall at some point in time thereby affecting their client’s schedule. For this reason, raw materials have to be sourced on time in order to ensure that CSS does not keep the customer waiting in the case where suppliers fail to meet up with raw material suppli es. Waiting has to be eliminated whenever it is possible. 3.4 Human Resources Keeping 200 employees to produce 2520 seats monthly could be too much for the company. This is a decision that most be clearly reconsidered in order to ensure that the company does not pay people who are doing nothing. The company needs to adopt a policy of using part time labour until it is able to pick up once more by winning new contracts in the sector. There is no point hiring too many workers when the company does not have many contracts. However, the company has to be looking for ways to grow. Growing can be done by gaining new markets. Since it has few markets, the company must keep just enough workers who are able to meet its customers’ demands. Secondly, it has to make sure that hires the right number of people at the right time to satisfy its customers’ needs. On the other hand, it must have a good bank of part timers whom it can call in at any time as soon as the market starts growing. 4. Discussion Leaning is very important in manufacturing businesses such as CSS. This is because it helps these businesses to keep work flowing from one process to the order by making the right arrangements with suppliers and hiring the right people to complete the different manufacturing processes (Chase et al, 2007). In the long term, CSS has to remain conscious of the needs to ensure that it is not wasting time or resources. Wastes can always hurt CSS’s profits. The company could be making profits, but because the operational system is characterised by wastes, the company will not make as much profits as it would have otherwise done. To begin with, lean operations have proven to reduce costs and improve productivity in the automobile industry in Japan (Pettersen, 2009) (Chase, 2008). This strategy was later on copied by many businesses in the manufacturing sectors that experienced similar positive results. In addition to eliminating wastes in many factories, lean operations have helped many companies to become more competitive after implementing lean strategies (Bicheno Holweg, 2009). CSS is a company that is currently struggling and needs to improve its performance. One of the ways it can do so is by adopting any strategies that will make it more competitive. Leaning is just one of many strategies available for the company. In order not to take any chances, the company needs to implement the leaning strategy that has been outlined in this report. Secondly, the key to success for CSS is to source the right quantity of raw materials on time in order to avoid shortage or waiting (Liker, 2008). Without raw materials, the company will be unable to meet the needs of its clients. Even with these raw materials, work schedules must be organised in a way that makes it possible to meet customers’ demands (Balle, M. Balle, 2009). For instance, machines must be in good conditions and regularly checked given that failure to do so can result in untimely break downs. Finally, appropriate transportation measures must be put in place to ensure that raw materials get to the factory on time (Radnor Bucci, 2010). The same is true for finished products that are needed by the client. If for instance, the chairs do not get to the client on time, it will affect the client’s flow of work (Chase et al, 2007; Montgomery, 2012). CSS has to put in place and effective transportation at every given moment that is able to get raw materials to the factories and finished seats to the customer at the lowest cost and on time to guarantee efficiency and profit making, which is the underlying mission of CSS. How to cite CSS Lean Operations Report, Essay examples

Vibration Control And Modeling Of Building Related Structures

Question: Discuss about the Vibration Control And Modeling Of Building Related Structures. Answer: Introduction The most important requirement involved in case of any construction work is the need to measure the safety based parameters of the structure. This will help in protecting the structures associated and the human resources involved with a construction related project against any natural hazards or challenges. For solving the problems associated, the need for the addition of passive or active control is required. In addition, this will also requires the addition of controlling strategy implementation, mathematical modeling formulations and application of controlling devices. This paper lists the various parameters that will be used for the analysis of vibration based applications. Problem statement The modern trends of the civil era have resulted in the development of various buildings for meeting the needs of the growing of the population. These structures are sometimes vulnerable to any hazards or threats which may occur naturally or due to man-made reasons (Mak Wang, 2015). This is the main reason for the increasing demand for addressing the effectiveness of the constructional safety factors. This has also been associated with the measurement of the vibration parameters from the structures associated. Aims and objectives This section includes the aims and objectives of this paper which will be followed for addressing the requirements. The aims of this research paper are to find the associated vibrations parameters from the constructions buildings that will be able to calculate the safety requirements of the structure. The objectives of this paper are as follows: To model the various structures associated to a building To estimate the sensing parameters of the building To successfully mitigate the problems associated with building structures Research methodology The research methodology section is mainly involved with the processes involved in collecting the data and analyzing it. All of these data or information is collected using a specific approach which is used for research methods. This paper has used the descriptive research design processes. In this case, the all the associated sections and the data are carefully analyzed and evaluated such that it can be addressed in this paper. Moreover, this paper will use the involvement of the secondary data collection methods. In this case, the utilization of secondary sources is adopted. These secondary sources are comprised of online journals, newspapers and websites. All these sources will be analyzed using the qualitative data analysis process. Literature review The concerns of the building are mainly due to the need for protecting them from natural or man-made activities. This may include strong winds or construction vibration due to a nearby site. It is required to have the necessary knowledge needed for the dynamics that it is involved with. For determining the concepts involved with the dynamics of the structures, the need to consider the reasons for excitations are required (Kouroussis et al., 2014). For example, the cause of an earthquake are mainly due to the sudden release in energy due to the tectonic movements in the earths crust which results in striking oscillation among the building structures. The output from these sources has been collected using various instruments which successfully shows the data associated. Research design For evaluating the data involved in the dynamic systems, the response from the input and output sensors will be analyzed. The inputs of these processes are the ones collected from the seismic forces. Data collection As stated earlier in this paper, the data associated with this paper will be collected from various secondary sources. These sources are the various online books or journals, government websites and newspaper articles. Data analysis The analysis of the data collected is done by adopting the qualitative data collection methods. This involves analyzing the secondary sources and then making the analysis associated. Secondary data collection and analysis As mentioned before, the data will be collected from the government websites which is responsible for civil engineering based construction projects. The data will also be obtained from various online PDFs and newspaper articles which show an extensive amount of data to be associated. After the successful collection of the data associated, the various information corresponding to building types and names and its associated parameter will be provided in an excel spreadsheet format for clear presentation of the analysis section of the paper. References Clementi, F., Gazzani, V., Poiani, M., Lenci, S. (2016). Assessment of seismic behaviour of heritage masonry buildings using numerical modelling.Journal of Building Engineering,8, 29-47. Ishugah, T. F., Li, Y., Wang, R. Z., Kiplagat, J. K. (2014). Advances in wind energy resource exploitation in urban environment: A review.Renewable and sustainable energy reviews,37, 613-626. Kouroussis, G., Van Parys, L., Conti, C., Verlinden, O. (2014). Using three-dimensional finite element analysis in time domain to model railway-induced ground vibrations.Advances in Engineering Software,70, 63-76. Lopes, P., Costa, P. A., Ferraz, M., Calada, R., Cardoso, A. S. (2014). Numerical modeling of vibrations induced by railway traffic in tunnels: From the source to the nearby buildings.Soil Dynamics and Earthquake Engineering,61, 269-285. Mak, C. M., Wang, Z. (2015). Recent advances in building acoustics: An overview of prediction methods and their applications.Building and Environment,91, 118-126. Zhang, Y., Habashi, W. G., Khurram, R. A. (2015). Predicting wind-induced vibrations of high-rise buildings using unsteady CFD and modal analysis.Journal of Wind Engineering and Industrial Aerodynamics,136, 165-179

Symptoms And Symptoms Of Concussion Patients Essay Example For Students

Symptoms And Symptoms Of Concussion Patients Essay Concussion patients tend to have distinct symptoms that validate they are concussed. Symptoms may vary from person to person, based on how serious the injury was and how much impact the incident had on the cranial region. Although symptoms differ from person to person, some of the most common signs of a concussion are balance issues, nausea, dizziness, or sometimes blurred vision. These symptoms are easy to recognize, because, as Elaine Landau reveals in her Head and Brain Injuries book, â€Å"The effects of any type of brain damage are usually worst immediately following an injury† (Landau 24). Furthermore, because all concussion patients experience symptoms differently, doctors often determine if the injury was an open or closed head injury first, and then divide symptoms into four categories to better assess and target patients specific needs. We will write a custom essay on Symptoms And Symptoms Of Concussion Patients specifically for you for only $16.38 $13.9/page Order now As outlined in Landau’s work, the two major categories of traumatic brain injuries are penetrating, or open, head injury (OHI) and closed head injury (CHI) (Landau 21). Open, or penetrating, head injuries can cause more trauma to the brain than closed head injuries. Open head injuries are also known as â€Å"penetrating head injuries†, because open head injuries involve something penetrating the skull and tearing its way into the brain, such as a gunshot wound. Landau gives a further, more visual description of this, by explaining how the bullet specifically ruptures the skull and enters the brain. Landau states that, after being shot in the cranium, â€Å"The bullet tears open the scalp, cracks the skull, and scrapes apart the soft tissue as it rips into the brain. Nerve fibers within the damaged area are stretched and torn, and numerous nerve cells are destroyed† (Landau 21). Although a gunshot wou. .eep too much or too little. Doctors stress the importance of regulating sleep patterns, because â€Å"not sleeping well can increase or worsen depression, anxiety, fatigue, irritability, and one’s sense of well-being† (http://www.msktc.org/tbi/factsheets/Sleep-And-Traumatic-Brain-Injury). Inadequate hours of sleep can also cause patients to develop sleep disorders, such as insomnia (difficulty falling asleep or staying asleep) or extreme drowsiness. These are caused by a chemical and physical change in the brain and an individual’s injury affecting the chemicals in their body that help them sleep. As a result, doctors often prescribe certain medications to help regulate sleep patterns (Citing above). The side effects of sleep disorders are what make this dangerous, and it is essential that patients take these necessary precautions to prevent future disorders from forming.

Medical Ethics Essay Sample

Medical Ethics Essay Sample Essay on Medical Ethics Medical practitioners are people who help us cure our sicknesses. They studied for many years just to acquire all the knowledge they have. They have different specialties designated for different types of diseases. Medical practitioners are the most reliable health care personnel to assess and treat disabilities and diseases that are either caused by both internal and external. Some of us may think that their profession is perfect because they can do anything and everything they want worth their patients, but the people in the medical field also have to follow proper ethical procedure. Medical or health care ethics has different versions. During the Byzantine era, there was a manuscript where Hippocratic Oath Medical or health care ethics is considered as moral principles that apply values in the practice of clinical medicine and scientific research. The medical or health care ethics applied to the concepts of health care setting. The application and significance of ethics are based on the set of values that the professionals can refer to when they experience either a conflict or confusion. The values that are included in the medical or health care ethics are respect for the concepts of beneficence, autonomy, justice, and non-maleficence. Medical or health care ethics was first understood and applied in 1803 by academic researchers. Thomas Percival was a medical practitioner who published a book that describes the expectations and requirements and professional expectations in the medical field. Code of Ethics began to be understood and then started to spread world wide. The concept has been amended; however, many academic professionals kept the essence of Percivals written document on medical or health care ethics. The medical or health care ethics has at least four basic principles. These are justice, beneficence, autonomy, and non-maleficence. These four principles are essential to evaluate the difficulties and merits to health care procedure and expenses. Autonomy requires that the patient should provide their full consent when making decisions about their health care condition. The medical practitioner should always ask for the patient’s consent before addressing a procedure. The decision of the patient must not be affected by the medical practitioners persuasion and it must always be his or her personal decision. The patient is informed about the expected consequences and risks after the procedure. The next principle is justice. This states that all the new medical information is always available to the public. The medical practitioner should not partake in discrimination and share the information whether the patient is either poor or rich. Justice applied to considering a fair dist ribution of scarce resources, competing needs, rights and obligations, and potential conflicts with established legislation. All the technologies should be available for all in order to diminish medical dilemmas. Beneficence requires that all medical procedure provided for the patients should all be beneficial. The health care providers should also update their knowledge, skills, and training in order to fit in the demand of the evolving world. In all circumstances, the medical practitioner should strive for the benefits of his or her patients in order to give them quality service. The last one principle is non-maleficence; this requires the health care provider to do his or her best to not do any harm to the patient or anyone who is involved. If harm cannot be fully diminished, it is their duty to, at least, minimize it by pursuing the greater good. Some assistive reproductive technologies have limited success rate, so it is sometimes difficult for the medical practitioner to apply the â€Å"no harm principle.† Principles of medical ethics always serve as a guide for the medical practitioners to fulfill their duty. Ethical standards provide a basis to prevent committing errors in their career. Medical ethics is very important because it helps medical practitioners save their patients in the most critical operations. The code is a written and used as a living testament that is always available to be edited by medical practitioners and researchers.

Education policy in USA Term Paper Example | Topics and Well Written Essays - 1500 words

Education policy in USA - Term Paper Example It has often been argued that education policies adopted by USA have not been as effective as expected during the planning phase owing to the persistence of several problems. One of the critical issues in the educational policy of USA can be identified as the lack of adequate number of teachers as compared to the number of students. Consequently, there is unevenness in the student-teacher ratio that is affecting the education system of the country. Furthermore, it has been analyzed that the rise in tuition fees of the collages is also an important issue to be worth discussing in the education policy of USA. It has also been viewed that the graduation percentage of USA has been decreasing in the recent times, probably because of the rising high education prices. Evidently, the government has been concerned about such issues, and thus, USA today aims to be the best in providing education in the world and lead the world in terms of college graduates by the year 2020 assisting educationa l institutions and states with requisite funding in order to minimize financial burden on schools which in turn is expected to cut education expenses in the country (AASCU, â€Å"Top 10 Higher Education State Policy Issues for 2010† Policy Almanac, â€Å"Education†; Policy Insider, â€Å"U.S. Dept. of Education Continues Funding School Improvement Grants†). The issues mentioned above are quite significant in relation to the development of the education system of the country. For instance, less student-teacher ratio would mean that students could be able to learn more efficiently and increase their chances of success. It has also been viewed that the success or the development of the students largely depends on the teachers.... orld and lead the world in terms of college graduates by the year 2020 assisting educational institutions and states with requisite funding in order to minimize financial burden on schools which in turn is expected to cut education expenses in the country (AASCU, â€Å"Top 10 Higher Education State Policy Issues for 2010† Policy Almanac, â€Å"Education†; Policy Insider, â€Å"U.S. Dept. of Education Continues Funding School Improvement Grants†). Significance The issues mentioned above are quite significant in relation to the development of the education system of the country. For instance, less student-teacher ratio would mean that students could be able to learn more efficiently and increase their chances of success. It has also been viewed that the success or the development of the students largely depends on the teachers. Additionally, the issue of rise in tuition fees has also affected the higher education in USA by a significant extent, especially among the low-income group and middle-income group students. Although the government has been allocating requisite funding to the schools, the occurrence of recent financial turmoil as well as the recessionary conditions in the economy can be identified to have widened the issue of rising education costs in USA. Hence, as education acts as a backbone of societal development, USA needs to intervene and solve such issues as failure to do so would de-motivate people from pursuing higher education courses and thus hampering the overall progress of the society on the whole (AASCU, â€Å"Top 10 Higher Education State Policy Issues for 2010†; Hopkins, â€Å"Colleges with the Lowest Student-Faculty Ratios†). Future Prospects It has been observed that the performance of the education policy of USA in the recent years has not been

Case Study analysis Example | Topics and Well Written Essays - 750 words

Analysis - Case Study Example It is an evident fact that communication is very important in a relationship. In such situations, in most cases, it has been observed that men communicate to achieve problem solution. This is similar in the case of western women but again the percentage is relatively low. Women are more likely to avoid the problem solving function of the communication between both the partners. In the chosen case of the marital couple, it becomes easy to understand that female partner is trying to discuss the issue with aggression (Broughton, 2008). The case also notes that both the partners are trying to set scores with each other which indicates the condition of conflict. It should be noted that if conflict resolution is not undertaken then it can lead up to complicated crisis between the couple. This is the situation where the Sum Zero concept is introduced which means that one of both the parties have to lose it to find out a resolution. This gives a lead to other situation where one party can ex pect a balance of score in any forthcoming conflict (Pappalardo, 1995). It should also be noted that the case under review is a conversation between a marriage couples who has egalitarian manner of relationship in which both the partners are empowered but the economic responsibilities of man makes him dominant in the relationship. The female oriented families (matriarchal couple) are those where a woman’s right must be completely considered as supreme. But in the case, it is to be noted that the male’s job is much important than the woman because of his limited scope of job (Hitch & Youatt, 2001). The conversation between the couple has been noted to be of less abusive language. There is no indication of abusive words used at regular interval showing that the couple is not from a very low socio-economic status. But it would be better to mention that the female partner needs to calm her tone so that the discussion between the couple can be taken easily so that they can find out the solution (Broughton, 2008). Recommendations: It is being suggested that women playing an emotional part in a relationship needs to evaluate communication function. At times, it is better to listen to the other partner when you do not seem to find out the relationship. In the evaluated case, it can be observed that male partner suggested her to have a new workplace to work because teaching is a very diverse field of interest. This notes that at least the male partner suggested a solution to the problem rather than just beating about the bush. Another situation analysis clause would be to let the other partner win. This does not make one lose it forever. A marital relationship is for life where one win can transform into another loss. This loss is not about property or possession but rather an argument or conflict. This practice is suggested to be solved through zero sum strategy. The use of power needs to be exercised when the family type is completely understood. Consid ering the fact that the couple is an egalitarian marriage bonded, it is suggested to the male partner to exercise his power for the need of elaborating decision making process to the female partner. And also, the woman partner needs to understand the imperativeness of the job of the man because he is the sole and base responsible end of the relationship in terms of

Globalization: The Homogenization Of Cultures

Globalization: The Homogenization Of Cultures The increased integration of humanity beyond the national borders is compressing the world into an interdependent global village. Today, many equate the process of globalization with the promotion of interests of the West, whose hegemony is propagated through the idea of liberalism. As a result of the Western superior power and cultural imperialism, the so-called Third World countries feel compelled to admit their superiority and subsequently to acculturate themselves, accepting the Western way of life as a norm. The greatest consequence of this is homogenization of cultures and the loss of identity in the process of implementing Western ideologies. Today, the world we live in is taking part in the process of an increased integration through the movement of people and goods. The growing development of communication makes the unification of the entire globe seem as something completely natural. Globalization of our societies and every day lives à ¢Ã¢â€š ¬Ã‚ ¦ However, the question that is being imposed upon us is whether this compression of the world into one global society means that the world is being enriched and unified, or will it be torn apart by nations self-interest conflicts in the battle for preservation of their identities? The wide variety and diversity of our cultures and identities has always been, without a doubt, a part of who we are. Societies and cultures learn how to grow and prosper through overlapping and borrowing from each other. Some would argue that cultures should not be perceived as individual, but that they need to be examined in a more general way, since they constantly change and evolve. Cultures stopped being related to a mere geographical area and its society; nowadays, they are linked to the contemporary time that they exist in, as well as to the entire globe. Thanks to the process of globalization, today we have unique emerging cultures, such as Internet culture, artists culture, culture of the young people from around the world and others that are becoming a part of a universal set of values and ideas, turning the world into one global culture. However, while this unification of cultures has its benefits, at the same time it brings along the risk of an intercultural and identity-related conflict. For some people, their culture is everything that makes them who they are, it is an essential part of their identity. For example, in a case of a possible dispute between cultures that have confronting views and prejudice against each other, their people will hold on strongly to their national identity and culture, because they feel intimately related to it and see it as their protection. In an effort to preserve ones culture, language or religion, people very often become involved in conflicts. Most importantly, these conflicts becomes aggravated by the consuming influence of biased media Furthermore, as a result of negative stereotypes, different cultures may view each other as alien and threatening and can lead to a clash of civilizations, as Huntington refers to it.FOOTNOTE NEEDED Additionally, an increased interaction between cultures can lead to the creation of a unified culture imposed by the more influencing and dominating one. Therefore, this would lead to the homogenization of the world. This brings around cultural imperialism as an inherent part, as well as a product of the overall process of imperialism, where one country with dominant economy, culture and policy has control over others. This causes the local cultures, especially those in the so-called Third World countries, to be exploited and challenged by the dominant, most often Western values. Unsurprisingly, this comes as an effect of many centuries during which West had the chance to establish its dominance in the world. Cultural imperialism occurs when one culture is presented in such a manner that is seems undeveloped and non-modern when compared to another. Accordingly, the dominant cultures standards and norms become gradually accepted by the locals who believe in its superiority. This is why some intellectuals equate globalization with the Western imperialism; they argue that the West is imposing its ideas of liberalism onto the rest of the world through the process of globalization and therefore ensuring and reaffirming its hegemony. Instead of physically colonizing the rest of the world, the West has chosen more subtle means of propagating its ideas. The spread of Western, namely American goods around the world is not a simple coincidence- it is a part of the process of cultural imperialism. In addition, instead of being a simple trend of consumerism of American products, cultural imperialism implies the implementation of American ideas such as freedom of speech and democracy. As a result, this process leads to the steady disperse of unique cultures across the globe as t hey succumb to the influence of the more powerful American culture. So, whats in it for the West and America and whats their real motive? Many people believe that the main reason is the protection of the unlimited access to foreign markets, along with an actual and concrete belief in the American superiority by their citizens. However, it is simple to convince the Americans of their own superiority, but when convincing foreign cultures, they have to be more assertive and creative. Thus, marketing, along with advertising, plays an extremely important role in the process of Americanization. Its importance lies in the fact that it has the ability to persuade others in the modernity and the advanced stage of development of those American goods. Consequently, they begin to dominate local markets, doing no good to the local economy; hence, the local production industry weakens and gives way to the American economic interests. Another way of influencing local cultures and identities is through the vehicle of Internet. It plays a huge role in propagating the American culture, and enables it to be extremely exposed to the entire globe. However, the users of Internet that wish not to be exposed to the influence of American propagating contents can easily avoid it, since they are the active players in the seek of information online. Nevertheless, those who choose to be exposed to it, Internet can severely increase it. Governments are aware of this, and some of them, like the Chinese and Cuban, have restricted their citizens from the free flow of information, in order to prevent the Western influence. Oxymoronically, by restricting them, their governments are reassuring the fact that their citizens will not be the providers, but mere recipients of the Internet information flow. On the other hand, there is a substantial number of scholars who believe that the process of Americanizing the world is, as a matter of fact, a good thing for the entire world. They argue that through globalization, people become aware of the importance of strengthening their identity so they work on its preservation. In contrast to that, cultural imperialism can also lead to the establishment of a homogenized global identity that would help bring the world together. Accordingly, it would have a positive effect, hence the world will be more secure and stable through the elimination of the diverse and conflicting cultures. The Americans are already on the way to establish a single world society with minimum or no cultural restraints. However, the question being imposed on us is whether the uncertain assurance of a world peace is enough to justify the gradual disappearance of the numerous local cultures. Even though indigenous cultures are aware of the growing impact of American cultur al imperialism, there is not much they can do to stop it, since they are not strong enough to compete. They could try to limit the access to information, but that would contradict with the basic human rights which guarantee that everyone is able to attain free and unlimited knowledge and information through any means of media. Theoretically speaking, every nation, religion, race and ethnic group are equal, as long as they fulfill the needs of their people. Unfortunately, having superior and inferior, dominant and subordinate cultures, equality among them seem to be impossible. However, domination is nothing new- it has always existed throughout the history of the world, especially during colonization when Western powers believed they need to civilize the indigenous nations, while they were in fact exploiting them. The need for a cultural dialogue : When it comes to globalization and the issue of cultural imperialism, there seem to be two opposing views: some believe that the interaction and unification of cultures will lead to a clash of civilizations, while others claim it will bring around the greatly needed dialogue and cooperation. The global culture of today is, without a doubt, being shaped by the West. Nevertheless, it can and must be challenged by those that are being influenced by it, who should not just adopt their norms, but adapt and shape them so they fit the framework of their own culture and values. In addition, the fact that it is not just one culture influencing the other should not be overlooked; it is actually a process of mutual interaction and impact. Despite the fact that it is one of the modern worlds greatest challenges, intercultural dialogue is probably the best solution to counter cultural conflicts and crisis. Instead of simply succumbing to the influence, or doing the opposite- refraining and prohibiting the goods, people and world organizations should try appealing to the American governments to pass laws to restrain their companies from selling goods that endanger the survival of local market, and those companies should be prohibited from doing business. America must be fair and admit that perhaps what is good for its own economy, might not be good for the rest of the world and that the rights of people should be put before the need to make profit.

Principles of Leadership in American Military History Essay -- essays

What is the description of a leader? Honor, respect, dignity, self-confidence, kindness, etc.? Moreover, what is the portrait of a leader? Is it the man who is able to stand in front of a crowd of thousands? Or the man who sits in his office, addressing the public through a TV screen? Is it the man who struggles for the rights he was born with, that people refuse to hand to him? Or is it the man who goes to jail after fighting for liberty and justice? These are all fine examples of leaders. It does not matter what their claim is. They all eventually die with honor, gain respect, and had the self-confidence to go public and go the extremes in order to obtain righteousness. There is nothing wrong with a leader failing, but future leaders should learn to not repeat the past, for better and for worst. There are â€Å"crossroads of our history† that are very similar to the recent news we are presented with, which defies not making the past’s mistakes. Whether they succeed fail, or fall back into the same hole the past has fallen into, these men display different qualities of a leader, positive or negatively. Both Patrick Henry and Barack Obama gave powerful speeches and shined a new light among many in their crowds with one major leadership skill: unity. In his speech at the Virginia Convention, Patrick Henry’s most persuasive qualities lay in his rhetorical questions. Beginning with â€Å"They tell us, sir, that we are weak—unable to cope with so formidable an adversary,† Henry jumps straight into his repetition of questions, hitting his audience with his words so continuously, they seem ultimately unanswerable. Following when the country will be stronger, he asks â€Å"Will it be when we are totally disarmed, and when a British guard shall b... ... minds, our opinions, our words, our strength and our will belong to the individual, and that is the most powerful weapon. There is no sign of an end to war, only the destruction of humanity. The timeline of history is repeating. Is our government looking at the errors of the past? Comparing our current crisis to Kennedy’s situation, is today’s enemy willing to compromise? Understandably, the precautions we have taken and the steps put forth these passed few years is due to the unpredictable behavior of our adversary. Perhaps we have really fallen into the same hole as our ancestors many years before, and our options really are limited and aiming in the same eventual fate. Maybe soon, every American, and others across the globe, will hold the same belief President Bush claims to own when he once said, â€Å"Out of this long political darkness, a brighter day will come.†

Rn Resume

Objective To be able to integrate professional competencies in the nursing role of growth oriented company as health care provider, health educator, patient's advocated and collaborator of care in competitive world of nursing profession. * Qualifications: Registered Nurse/Registered Midwife Skilled in Surgical-orthopedic and Medical ward Skilled in Delivery Room and Intensive Maternal Unit Has two (2) years working experience in Government HospitalsIntravenous Therapist trained * Possesses good interpersonal and communication skills * Saudi Barometric Council Passer * Computer literate Work Experience: I-POSITION: staff Nurse Area: Delivery Room/ Intensive Maternal Unit Name of Hospital: Sambaing City Medical Center Location: Gambol City Duration: November 15 2011- December 31 2012 Hospital Background: Tertiary Level 4 teaching-training hospital with an authorized bed- facility. Job Descriptions: capacity of 300 and government-owned health care . . 4. Attends morning rounds. Performs direct patient care procedures. Manages and assists normal deliveries. Take records and charts. 6. Assists in the preparation of patients for treatment, examination and surgery. 7. Administers medications. 8. Operates diagnostic procedures. Al- POSITION: staff Nurse Area: Medical and Surgical Ward/ Orthopedic Ward Name of Hospital: Camp Innovator General Hospital Location: Sambaing City Duration: October 01 2010-October 05 2011Hospital Background: A 200-bed capacity secondary hospital at Western Mindanao Command Armed Forces of the Philippines. 5. Performs direct patient care procedure. Carries out doctor's order. Observes patient's records and reports. Operates diagnostic procedures. Maintains records reflecting patient condition, medication and treatment. Sets up treatment trays and prepares instrument and equipment.

World War One Of The Worst Wars Of All Time - 2226 Words

World War 2 was one of the worst wars of all time. In 1939, Adolf Hitler started a war because of his genocide of Jewish people. And, he was succeeding. No one could stop him. We needed something to change. If we didn’t stop something soon, Hitler would take over all of the Middle East and presume to take over the world. The US thankfully came up with a solution to this, they created an unstoppable force, the B-29 Superfortress Fighter Plane. The B-29 was the most destructive warplane ever to be invented. It was the fastest, most advanced plane of its time. The B-29 was used in World War Two and won the excruciating war for the Americans. The B-29 is even admired by people today. This is the plane that saved the world. There were nearly†¦show more content†¦They had to work in coal mines and chop wood. On top of that, they were given a very limited number of supplies and hope. With numbers branded to their wrists, they could have also been killed in the countless gas chambers and mean guards that Hitler purchased. They were given wooden beds with no sheets or blankets, stale bread, and broth, and on top of that, they were taunted by the Nazi Guards everywhere. All Jewish people feared Adolf Hitler. He was their worst nightmare. Many Jews believed that they would never make it out alive, others were a little more hopeful, and others rebelled against the Nazis. But what they didn’t know is that the Jews that still remained were going to make it out alive, thanks to the United States and the Allies. World War Two was one of the fiercest, destructive, brutal wars ever to be recorded in history. Great Britain was falling to the Nazis, at the time Great Britain wasn’t as advanced as they are now. Being allied with the most advanced country at the time, the United States, they asked them to create an aircraft that would help them get out of their plight. The United States responded with the most advanced warplane in the history of the world. What is the B-29? World War Two was such a brutal war that the United States actually shut down the automobile manufacturers for 4-5 years just to focus more